Arden Industries Terminator

NOT "ONE-SIZE-FITS-ALL" Arden Industries manufactures each Terminator system to handle the customer's specific needs for the intended installation.

Terminator-Tablet-Feed.jpg

22-50TRI

Direct Feed Tablet Chlorination 

Using 1” Trichloroisocyanuric Acid (TriChlor) tablets, the Terminator is designed to work off of an injector Venturi, and a booster pump. The flow is precisely controlled over the tablets via a flowmeter and control valve. A uniquely designed spray technique provides measured erosion of the tablets and a more accurate solution residual.

 

PICTURED: The Terminator with a tablet container, control panel with flowmeter, supply pressure gauge, and chlorine solution tank for direct feed. This unit can be configured for flow rates from 25 gpm up to 6000 gpm.

See Installation Diagram

Terminator-Batch-Feed.jpg

22S-100TRI / DF

Batch Feed Tablet Chlorination 

Using 1” Trichloroisocyanuric Acid (TriChlor) tablets, the Terminator is designed to work in conjunction with a chemical metering pump. The flow is precisely controlled over the tablets via a flowmeter and control valve. A uniquely designed spray technique provides measured erosion of the tablets and a more accurate solution residual.

 

PICTURED: The Terminator with a tablet container, control panel with flowmeter, supply pressure gauge, and chlorine solution tank for batch feed. This unit can be configured for flow rates from 25 gpm up to 6000 gpm.

See Installation Diagram

Terminator -Installation Diagram

Terminator Models

All Arden Industries Trichlor feeders are available in low and high capacity models. All use 1" ACL90 Trichlor tablets (approx. 90% available chlorine).

MODEL NO. / CAPACITY in LBS.

22-50TRI-SKID.jpg

22S-50TRI

Terminator-Skid-Mounted-Tablet-Chlorinat

22S-100TRI

Terminator-High-Capacity-Feeder

HIGH CAPACITY FEEDER

22S-200 or 300TRI